Upc Specific Commands; Aux I/O Interface Calibration Commands - Pacific Power Source LMX Series Operation Manual

8.3.2

UPC Specific commands.

Following commands are included for UPC compatibility mode only and don't perform any function
other than providing query responses for use with legacy software programs.
Query Format
Query Format
Command Syntax
Query Format
8.3.3

AUX I/O Interface Calibration Commands

For a list of AUX I/O calibration commands, see Section 8.10.4, on page 355.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
CALibrate:VALue:XFMRRATIO?
CALibrate:VALue:AMPLIFIERS?
CALibrate:KFACTORS <k_int_Va, k_int_Vb, k_int_Vc,
k_ext_Va, k_ext_Vb, k_ext_Vc,
k_Ia, k_Ib, k_Ic, k_oscA, k_oscB,
k_oscC>
CALibrate:KFACTors:ALL?
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 207 of 463