Table of Contents
Advertisement
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Syntax
Description
Query Example
Query Syntax
Description
Query Example
Query Syntax
Description
Query Example
Query Syntax
Description
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
[SOURce:]PROTect[:RMS]:CURRent:TDELAY <DELAY>
This command sets the rms current protection trip delay in 100
msecs increments, i.e. as setting of 5 means 500 msec.
< DELAY >
<nr1>
PROTect:CURR:TDELAY 5
[SOURce:]PROTect[:RMS]:CURRent:TDELAY?
<nr1>
PROT:CURR:LEV?
5
[SOURce:]PROTect[:RMS]:CURRent:TDELAY:MINimum?
This command returns the minimum rms current protection trip
delay setting.
PROT:CURR:TDELAY:MIN?
0
[SOURce:]PROTect[:RMS]:CURRent:TDELAY:MAXimum?
This command returns the maximum rms current protection trip
delay setting.
PROT:CURR:TDELAY:MAX?
3000
[SOURce:]PROTect[:RMS]:CURRent:TDELAY:DEFault?
This command returns the default rms current protection trip delay
setting.
[SOURce:]PROTect[:RMS]:CURRent:TDELAY:DEFault?
41.667
[SOURce:]PROTect[:RMS]:CURRent:TRIPped?
This command returns rms current protection trip status. Returns 1 if
tripped or 0 if not.
PROT:CURR:TRIP?
41.667
[SOURce:]PROTect[:RMS]:CURRent:TRIPped:CLEar
This command clears the rms current protection trip status. Once
cleared, the power source output can be enabled.
None
n/a
PROT:CURR:TRIP:CLE
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 271 of 463
Advertisement
Table of Contents
