Table of Contents
Advertisement
5. Next, select the "Windows" directory
6. Run the"Driver_Installer.exe" located in this directory as shown below.,
7. Allow the installation to complete.
At the end of this process, you should be able to see the two PPST USB drivers in the
Windows Device Manager window under "Network Adaptors" and "Ports (COM & LPT)"
respectively. The USB interface is now ready for use.
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Figure 9-1: PPST USB Drivers visible in Windows Device Manager
LMX SERIES™ OPERATION MANUAL
USB Driver Installation
SECTION 9:
Page 371 of 463
Advertisement
Table of Contents
