Table of Contents
Advertisement
6.4.15 PROGRAM & MEASUREMENTS Soft Keys
The following five soft keys are available on the main PROGRAM screen.
SOFT KEY
Presets (SK1)
Change Preset
(SK2)
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Description
Changes all soft keys to up to five preset values that may be used to
change the selected parameter to any of the preset values shown on
the soft key labels. This provides a quick way to set commonly used
values. It is also possible to reprogram these presets to user specific
values. Refer to Section 6.4.5, "Customizing Output Programming
Preset Soft Key Values" on page 97 for details.
The following presets are offered for the parameters listed:
Frequency
50Hz, 60Hz, 400Hz, 800Hz, 1200Hz
Voltage AC
115V, 230V, 300V
Current limit
MAX, 15A, 4A, PEAK CURRENT
Power limit
MAX, 4kW, 2kW, 1kW
kVA limit
MAX, 4kVA, 2kVA, 1kVA
Access UNIT CONFIGURATION screen to change preset values.
LMX SERIES™ OPERATION MANUAL
Front Panel Operation
SECTION 6:
Page 107 of 463
Advertisement
Table of Contents
