Table of Contents
Advertisement
Query Syntax
Description
Returned Data Format
Query Example
Query Syntax
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Syntax
Description
Parameters
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
[SOURce:]PULSe:WIDTh:MAXimum?
This command the returns maximum permissible set value for the
PULSE width.
<nr2>
PULS:WIDT:MAX?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
[SOURce:]PULSe:WIDTh:DEFault?
This command returns the default set value for the PULSE width.
<nr2>
PULS:WIDT:DEF?
Query return values for MINimim, MAXimum and DEFault are dependent on
MODE and interdependent parameter value settings
[SOURce:]PULSe:MODE <nr2>, <opt>
This command sets the pulse width in seconds.
< 0 | PW | 1 | PD | 2 | WD >
Encoding:
0 | PW program pulse by period and width
1 | PD
program pulse by period and duty cycle
2 | WD program pulse by width and duty cycle
<nr1> or <cr>
PULS:MODE WD
[SOURce:]PULSe:MODE?
<nr1>
PULS:MODE?
2
[SOURce:]PULSe:MODE:CATalog?
This command returns the available programming modes: "0,Period
and width,1,Period and duty cycle,2,Width and duty cycle".
None
<cr>
PULS:MODE:CAT?
0,Period and width,1,Period and duty cycle,2,Width and duty cycle
[SOURce:]PULSe:RAMP <nr2>, <opt>
This command sets the pulse ramp time in seconds.
Ramp time, Option: < NORmal | SATurate >
Default is NORmal if optional second parameter is omitted.
<nr2>, <cr>
PULS:RAMP 0.2
[SOURce:]PULSe:RAMP?
<nr2>
PULS:RAMP?
0.2
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 301 of 463
Advertisement
Table of Contents
