Table of Contents
Advertisement
7.12.3 Analog Outputs
Analog outputs allow external equipment to monitor power source output values using an
analog DC output signal. The assignment of measurement functions to each of four
available outputs can be configured from the front panel.
Available settings are:
•
CHANNEL
•
OUTPUT VOLTAGE
•
MEASUREMENT
•
RANGE
•
GAIN
•
OFFSET
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
SECTION 7: Auxiliary I/OError! Reference source not found.
[ 1 | 2 | 3 | 4 ]
Output setting
Select measurement to be assigned to output
0.0000 to 5.000 V
0.000 to 1000
– 1000 to +1000
LMX SERIES™ OPERATION MANUAL
Page 197 of 463
Advertisement
Table of Contents
