Miscellaneous System Commands - Pacific Power Source LMX Series Operation Manual

8.9.13 Miscellaneous System Commands

Command Syntax
Description
Returned Data Format
Query Format
Query Format
Description
Returned Data Format
Query Example
Command Syntax
Description
Returned Data Format
Query Format
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Query Format
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
SYSTem:BEEP
This command generates a beep from the front panel speaker. May
be used in ATE programs to get operator's attention. Make sure the
beep volume is not set to 0. See
<cr>,...,<cr>
None
SYSTem:MEMory:CATalog?
This command returns the available memory types catalog.
<cr>,...,<cr>
SYST:MEM:CAT?
INTERNAL, RAM
SYSTem:MEMory:REMove
This command unmounts system memory.
<cr>,...,<cr>
None
SYSTem:DELete <PATH>
This command deletes a file or folder. The path or filename can be
between double quotation marks or not.
PATH or FILE
<cr>
SYST:DEL internal/program/program_1.xml
"
SYST:DEL internal/program/program_1.xml"
SYST:DEL temporal/program/program_1.xml
SYST:DEL "temporal/program/program_1.xml"
none
SYSTem:FILE:TYPE? <MEM>
This command returns the file type in numeric available memory
types catalog.
<nr1>
SYST:FILE:TYPE? RAM
0
SYST:FILE:TYPE? INTERNAL
0
SYSTem:SCREENshot
This command takes a screen shot of the LCD display. The LCD image
is saved as a ".png" format image file to folder "internal/screenshots"
None
N/A
SYST:SCREEN
none
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
SYSTem:INTERFace:VOLume
cmd.
Page 336 of 463