Ramp Time & Slew Rate - Pacific Power Source LMX Series Operation Manual

10.9.3 Ramp Time & Slew Rate
The Slew Rate screen has entries for all available programmable slew rate settings. This includes
Voltage AC and Frequency. Note that both are mutually exclusive as they would conflict with
each other. To use programmable slew rates, the RAMP TIME must be disabled.
Slew Rates can be set for Voltage AC and Frequency.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
LMX SERIES™ OPERATION MANUAL
LAN Interface Configuration
SECTION 10:
Page 411 of 463