Customizing Output Programming Preset Soft Key Values; For Details On Change Any Available Pre-Set Soft Key Value, Refer To Section 6.7.6, "Transient Settings Screen - Pacific Power Source LMX Series Operation Manual

6.4.5

Customizing Output Programming Preset Soft Key Values

The power source allows the user to set up his own preferred or often used output
programming values in place of the factory default selections. This can be done from the
SYST menu by selecting the UNIT CONFIGURATION 2 OF 2 screen and pressing the "User
Presets" soft key.
6.4.6 For details on change any available pre-set soft key value, refer to
Section 6.7.6, "TRANSIENT SETTINGS Screen
The TRANSIENT SETTINGS screen defines operation of transient execution.
Available settings are:
Continuous Self Calibration
Auto RMS This field allows enabling or disabling of the Auto RMS mode for transient mode
operation. Refer to section 0, "

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
This CSC mode is similar to the CSC mode for steady state
operation but applies to transient mode.
LMX SERIES™ OPERATION MANUAL
Front Panel Operation
SECTION 6:
Page 97 of 463