System Firmware Commands - Pacific Power Source LMX Series Operation Manual

8.9.11 System Firmware Commands

Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
SYSTem:FW:POWER[:VERsion]?
This command returns the firmware revision of the power converter
DSP's. This information is for reference only.
<cr>-<cr>
SYST:FW:POWER:VER?
81.0.0.RC8-77.1.0
SYSTem:FW:FRONTPANEL:VERsion?
This command returns the firmware revision of front panel controller
processor. This information is for reference only.
<cr>
SYST:FW:FRONTPANEL:VER?
2.0.0
SYSTem:FW:FRONTPANEL:APPS:VERsion?
This command returns the firmware revision of front panel controller
user interface application. This information is for reference only.
Note: This revision number is also returned as part of the *IDN?
query response.
<cr>
SYST:FW:FRONTPANEL:APPS:VER?
2.0.0
SYSTem:HWREVision?
This command returns the hardware revision (build) of the power
source.
<nr2>
SYST:HWREV?
0
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 334 of 463