Table of Contents
Advertisement
8.9.6
System Sanitization Commands
Query Format
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
8.9.7
Communication LAN Commands
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Query Format
Description
Returned Data Format
Query Example
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
SYSTem:SANITIZE:CODE?
Returns sanitization password string.
<nr1>
SYSTem:SANITIZE:CODE?
0659
SYSTem:SANITIZE <code>
Erases all user data stored in non-volatile memory settings including
settings and custom waveforms if required. The code is obtained by
the query command above.
None
n/a
SYST:SANITIZE 0659
SYSTem:COMMunicate:LAN[:ENABle]
This command turns remote control via LAN on or off. To control the
power source through its LAN interface, this state has to on (1).
< 0 | OFF | 1 ON >
<b>
SYST:COMM:LAN ON
SYSTem:COMMunicate:LAN[:ENABle]?
SYST:COMM:LAN?
1
SYSTem:COMMunicate:LAN:STATus?
This command returns all LAN settings in a single comma delimited
string of values.
<cr>, <cr>,.....,<cr>,<cr>
SYSTem:COMMunicate:LAN:STATus?
192.168.14.22,255.255.254.0,192.168.15.254,192.168.15.208,LMX-
106378937,LMX-106378889,0,1,0
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 326 of 463
Advertisement
Table of Contents
