Pacific Power Source LMX Series Operation Manual page 349

8.10.1.6 SYSTem:DIO:STROBE
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
SYSTem:DIO:STROBE:OUTPustate <b>
Sets the function strobe mode active when the output relay changes
state
< 0 | OFF | 1 | ON >
<b>
SYST:DIO:STROBE:OUTP 1
SYSTem:DIO:STROBE:OUTPustate?
<b>
SYST:DIO:STROBE:OUTP?
1
SYSTem:DIO:STROBE:SOURce <b>
Sets the function strobe mode to program changes.
< 0 | OFF | 1 | ON >
<b>
SYST:DIO:STROBE:SOUR 1
SYSTem:DIO:STROBE:SOURce?
<b>
SYST:DIO:STROBE:SOUR?
1
SYSTem:DIO:STROBE:TRANsient<b>
Sets the function strobe mode to generate an output at the start of a
transient execution.
< 0 | OFF | 1 | ON >
<b>
SYST:DIO:STROBE:TRAN 1
SYSTem:DIO:STROBE:TRANsient?
<b>
SYST:DIO:STROBE:TRAN?
1
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 349 of 463