5.7 Grounding Requirements
CAUTION: USE COPPER CONDUCTOR WIRING ONLY
Use only copper conductor (CU) wiring for all AC Input, AC Output and Ground Connections.
Utilisez uniquement un câblage à conducteur en cuivre (CU) pour toutes les connexions
d'entrée CA, de sortie CA et de mise à la terre.
5.7.1
Chassis Ground Connection Required
The unit MUST be grounded using proper Earth Ground at all times. Correct grounding of
your electrical system infrastructure according to applicable national standards must also be
observed.
Entire Contents Copyright
2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
ATTENTION: UTILISER UNIQUEMENT LE CÂBLAGE DU
CONDUCTEUR EN CUIVRE
WARNING
SHOCK HAZARD: Equipment must be grounded.
AVERTISSEMENT
RISQUE DE CHOC: l´équipement doit être mis à la terre.
LMX SERIES® OPERATION MANUAL
Unpacking and Installation
SECTION 5:
Page 66 of 463