Waveform - Pacific Power Source LMX Series Operation Manual

10.7.5 Waveform

The power source supports a number of waveforms, most of which are user programmable
arbitrary waveforms. The Waveform screen may be used to preview, select and download any
of the waveforms stored in internal memory for output on one or more phases. The phase
selection "ABC" or separate "A:", "B" and "C" buttons on the upper right hand side are used to
select all or an individual phase. The WAVEFORM drop down list will show all available
waveforms.
In addition to selecting the active waveform
for output, the following controls are
available to manage waveforms:
CONTROL
IMPORT....
EXPORT...
EDIT...
DELETE
NEW...

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
Purpose
Import csv format waveform data files.
Export selected waveform to csv format file
Access Waveform Edit screen to edit selected waveform. Also available from the
CONTROL pull-down menu.
Delete selected waveform. Note: Waveform 1-SINE cannot be deleted.
Access the Waveform Edit screen to create a new waveform in the browser.
LMX SERIES™ OPERATION MANUAL
LAN Interface Configuration
SECTION 10:
The image part with relationship ID rId303 was not found in the file.
Page 392 of 463