Front Panel Access Control - Pacific Power Source LMX Series Operation Manual

10.3.2 Front Panel Access Control

Setting remote control access levels and interface types is accomplished from the SYSTEM menu
under Interfaces.
Scroll down to the INTERFACE entry and press Enter to access the available INTERFACE SETUP
screen.
The second soft key is labelled "Access Control" and brings up the access control screen shown
below.
The IP Filter list will provide access to the list of IP addresses that have been granted access by
the local operator. This list can be erased if it is necessary to deny future access to the power
source.

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
LMX SERIES™ OPERATION MANUAL
LAN Interface Configuration
SECTION 10:
Page 378 of 463