Pacific Power Source LMX Series Operation Manual page 306

Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Description
Returned Data Format
Query Example
Command Syntax
Description
Parameters
Parameter Format
Example
Query Format
Description
Returned Data Format
Query Example

Entire Contents Copyright 2018 by Pacific Power Source, Inc. (PPS) • All Rights Reserved • No reproduction without written authorization from PPS.
LMX Series Power Source Operation Manual
[SOURce:]PULSe <cr>
>>> Alias for PROGram:TRANsient command. <<<
This command controls pulse transient execution
< RUN | STOP | PAUSe | STEP | RESTart >
<cr>
PULS RUN
[SOURce:]PULSe?
Query format returns the pulse transient execution state as either
RUN, STOP, PAUS, STEP or REST
<nr1>
Return values respresent running state as follows:
0 Stopped
1 Running
2 Paused
3 Stepping
4 Waiting for trigger
PULS?
1
[SOURce:]PULSe:LOAD
This command converts the pulse transient definition to the power
source's regular transient segment format and loads it in the
controller real-time memory for execution.
None
n/a
STEP RUN
[SOURce:]PULSe:LOAD?
Query format returns a 1 if the pulse transient load operation was
successful, otherwise returns 0.
<nr1>
Return values respresent:
0 Load Failed
1 Load completed
STEP?
1
LMX SERIES™ OPERATION MANUAL
Remote Control Programming
SECTION 8:
Page 306 of 463