Optional) Setting Hwtacacs Timers; Optional) Configuring Retransmission Of Accounting-Stop Packet - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security
By default, the traffic is expressed in bytes on the S3700.
----End

1.5.10 (Optional) Setting HWTACACS Timers

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
hwtacacs-server template template-name
The HWTACACS server template view is displayed.
Step 3 Run:
hwtacacs-server timer response-timeout value
The timeout interval for an HWTACACS server to send response packets is set.
By default, the timeout interval for an HWTACACS server to send response packets is five
seconds.
If the S3700 receives no response from an HWTACACS server during the timeout interval, it
considers the HWTACACS server as unavailable. In this case, the S3700 performs
authentication or authorization in other modes.
Step 4 Run:
hwtacacs-server timer quiet value
The time taken to restore an HWTACACS server to restore to the active state is set.
By default, the time taken by the primary HWTACACS server to restore to the active state is
five minutes.
----End
1.5.11 (Optional) Configuring Retransmission of Accounting-Stop
Packet
Context
If the HWTACACS accounting mode is used, the S3700 sends an Accounting-Stop packet to
the HWTACACS server after a user goes offline. If the connectivity of the network is not
desirable, you can enable the function of retransmitting the Accounting-Stop packet to prevent
the loss of accounting information.
Procedure
Step 1 Run:
system-view
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
23