Retry Stop-Accounting - Huawei Quidway S2000 Series Command Manual

Command Manual - Security
Quidway S2000 Series Ethernet Switches
realtime-accounting command, you can restore the maximum times of real-time
accounting request failing to be responded to the default value.
RADIUS server usually checks if a user is online with timeout timer. If the RADIUS
server has not received the real-time accounting packet from NAS, it will consider that
there is line or device failure and stop accounting. Accordingly, it is necessary to
disconnect the user at NAS end and on RADIUS server synchronously when some
unexpected failure occurs. Huawei Quidway Series Ethernet Switches support to set
maximum times of real-time accounting request failing to be responded. NAS will
disconnect the user if it has not received real-time accounting response from RADIUS
server for some specified times.
How to calculate the value of count? Suppose RADIUS server connection will timeout
in T and the real-time accounting interval of NAS is t, then the integer part of the result
from dividing T by t is the value of count. Therefore, when applied, T is suggested the
numbers which can be divided exactly by t.
For the related command, see radius scheme
Example
# Allow the real-time accounting request failing to be responded for up to 10 times.
[Quidway-radius-huawei] retry realtime-accounting 10

2.2.14 retry stop-accounting

Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
RADIUS server group view
Parameter
retry-times: Specifies the maximal retransmission times after stopping accounting
request,. ranging from 10 to 65535. By default, the value is 500.
Description
Using retry
retransmission times after stopping accounting request . Using undo retry
stop-accounting command, you can restore the retransmission times to the default
value.
Because the stopping accounting request concerns account balance and will affect the
amount of charge, which is very important for both the user and ISP, NAS shall make its
best effort to send the message to RADIUS accounting server. Accordingly, if the
stop-accounting command, you can configure the maximal
2-27
Chapter 2 AAA Configuration Commands