Subaru Legacy 2002 Service Manual page 2999

Seats
B: INSTALLATION
1. WAGON
S908350A1101
1) Install in the reverse order of removal.
Tightening torque:
Refer to COMPONENT in General
Description.
<Ref. to SE-5, REAR SEAT(WAGON),
COMPONENT, General Description.>
2. SEDAN
S908350A1102
1) Hook and fasten the upper-back side of the rear
seat backrest to the body hook.
2) Tighten the bolt and install the backrest.
3) Hook and fasten the seat cushion to the hook
on the lower part of the rear seat backrest.
Tightening torque:
Refer to COMPONENT in General
Description.
<Ref. to SE-4, REAR SEAT(SEDAN),
COMPONENT, General Description.>
REAR SEAT
S908350A11
G5M0348
B5M0811
B5M0914A
SE-18
C: DISASSEMBLY
1. WAGON
S908350A0601
1) Remove rear seat. <Ref. to SE-17, REMOVAL,
Rear Seat.>
2) Remove bolts, and then remove bracket hinge.
3) Remove rear backrest lock cover.
4) While turning counterclockwise rear backrest
knob, remove it.
5) While picking up tip with pliers, remove head-
rest lock bushings.
S908350A06
B5M0981
B5M0983
B5M0982