Front Seat - Subaru Legacy 2002 Service Manual

Hide thumbs Also See for Legacy 2002:

Table of Contents

2. Front Seat

S908343A1801

1) Disconnect ground cable from battery.

2) While pressing headrest lock button, remove

3) Tilt forward backrest.

4) Move seat to full front end.

5) Remove bolt cover at rear end of slide rail.

6) Disconnect side airbag connector under the

seat. (Side airbag equipped vehicle)

7) Disconnect connectors of seat heater and seat

belt warning. (Seat heater equipped vehicle)

8) Remove two bolts at rear side of seat rail.

1) Move seat to full rear end.

2) Remove two bolts at front side of seat rail.

3) Remove front seat from vehicle.

When removing seat form vehicle, take care

not to damage body, seat, or trim.

1) While pressing headrest lock button, remove

2) Tilt forward backrest.

3) Move seat to full front end.

4) Remove bolt cover at rear end of slide rail.

S908343A1802

Table of Contents