Subaru Legacy 2002 Service Manual page 3009

Hide thumbs Also See for Legacy 2002:

Table of Contents

GENERAL DESCRIPTION

Security and Locks

5. KEYLESS ENTRY SYSTEM

S909001A0505

(1) Keyless entry control module

(2) Rear gate latch switch (Wagon)

(3) Door switch

¼ Before disassembling or reassembling parts,

always disconnect battery ground cable. When

repairing radio, control module, etc. which are

memory contents before disconnecting battery

ground cable. Otherwise, these contents are

cancelled upon disconnection.

¼ Reassemble parts in reverse order of disas-

sembly procedure unless otherwise indicated.

¼ Adjust parts to specifications contained in

this manual if so designated.

¼ Connect connectors and hoses securely dur-

ing reassembly.

¼ After reassembly, ensure all functional parts

operate smoothly.

¼ Airbag system wiring harness is routed near

the electrical parts and switch.

¼ All airbag system wiring harness and con-

nectors are colored yellow. Do not use electri-

cal test equipment on these circuits.

¼ Be careful not to damage airbag system wir-

ing harness when servicing the ignition key

Chapters

Table of Contents