Inserting Data (Initial Data Overwrite Mode) - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
Precautions
(1) When changing to another function such as the program check, or to another screen such as the monitor screen when
"Editing" displays, the operation message "Save current file? (Y/N)" displays. If [N] key is pressed changing to the other
screen once, and the edit screen is selected again, the program before editing operation will be displayed. (Edited con-
tents will be invalid.)
(2) When changing to another function such as the program check, or to another screen such as the monitor screen when
"Editing" displays, the operation message "Save current file? (Y/N)" displays. If the file could not be saved due to "Mem-
ory over", etc., even the [Y] key is pressed, the error message displays and the screen is not changed. The screen dis-
play varies depending on the succeeding operation (a) or (b) as follows.
When the file could not be saved and the error message displays due to "Memory over", etc., even the [INPUT] key is
pressed before the screen change operation, the screen display also varies depending on the succeeding operation (a)
or (b) as follows.
(a) When changing to another function such as the program check, or to another screen such as the monitor screen
without editing, the screen transition is performed without displaying the operation message. If the display returns
to the program edit screen again, the previously saved contents are displayed.
(b) When changing to another function such as the program check, or to another screen such as the monitor screen
after editing (data setting key operation, data correction key operation, or the menu [Paste], [Line clear] or [String
replace] operation), the operation message "Save current file? (Y/N)" is displayed.
(3) Up to 225 characters can be input in one block.
(4) "Saving" is displayed in flickering during saving.

3.6.4 Inserting Data (Initial Data Overwrite Mode)

Operation method
(1) Move the cursor to the position where data is to be in-
serted.
(2) Press the [INSERT] key.
(3) Set the data.
(4) When the setting is completed, press the [INPUT]
key.
Note
(1) Up to 256 characters can be set in one line.
(2) The insertion mode will be finished if a key such as [DELETE], [C.B], [CAN], [INPUT], [↑], [↓], [←], [→], [|←], [→|],
or pressed.
(3) For normal editing, EOB(;) is added to a row without EOB(;), and the cursor moves to the next line. A row with EOB(;)
is skipped, and the cursor moves to the next line. (No cursor movement.)
The mode changes to the insertion mode.
"INS" appears to the right of the file name.
The cursor changes to '|'.
The set data is fixed.
The cursor does not move, but if there is no EOB (;) at
the end of the line, it will be added. Then, the cursor
moves to the next line.
The mode returns to the overwrite mode, and the mes-
sage "Editing" disappears.
65 IB-1501453-C