Mitsubishi Electric C80 Series Instruction Manual page 209

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
<L system>
(1)
(3)
(2)
Display items
Display items
(1) Tool in use
(2) Regist group list
[CHOSEN TOOL]
Display items
(3) Group
(4) Tool No.
(5) Comp No.
(6) Method
(7) Used
(8) Total
(9) Life
(10) ST
IB-1501453-C
(6)
(4) (5)
The life management information of the tool currently being used appears here.
The group Nos. registered as the tool life management data are displayed in a list.
Group Nos. can be set from 1 to 9999, and maximum 80 groups can be set.
An asterisk will be added to the No. of the group in which all tools have reached their
lives.
<Note>
The maximum number of the registered groups depends on the specifications.
Details
Displays the life management group No. currently be-
ing used.
Displays the tool No. currently being used.
Displays the compensation No. currently being used. 1 to 80
Displays whether the group currently being used is
controlled by the usage time or usage count.
Displays the usage data for the tool currently being
used.
Displays the total usage data for the tool currently be-
ing used.
In the case of tools using multiple compensation Nos.,
the total usage data for all compensation Nos. displays.
In the case of only one compensation No., the same
value as "Used" displays.
Displays the life value for the tool currently being used. Usage time: 0 to 99999999 (s)
Displays the status of the tool currently being used.
184
Details
Display range
1 to 9999
1 to 999999
0: Hours
1: Times
Usage time: 0 to 99999999 (s)
Usage count: 0 to 999999 (set)
Usage time: 0 to 99999999 (s)
Usage count: 0 to 999999 (set)
Usage count: 0 to 999999 (set)
0: Unused tool
1: Used tool
2: Normal life tool
3: Skipped tool
(10)
(9)
(8)
(7)