Mitsubishi Electric C80 Series Instruction Manual page 64

C80 Series Instruction Manual
2 Screen Operations
[Numerical keypad display]
(4)
(8)
Display items
Display items
(1) Input section
(2) Lower-case letter input
key
(3) Data setting keys
(4) Window operation keys [LIST]: This displays the menu list window.
(5) RESET key
(6) SFP key
(7) F0 key
(8) Page up/down keys
(9) Cursor keys
(10) Blank key
(11) Data correction keys
(12) Display position switch This switches the display position of the software keyboard.
(13) Block end key
(14) INPUT key
(15) Shift key
[All keys display]
(1)
(5)
(11)
(4)
(3)
(3)
(9)
(8)
(16)
(9)
This displays a character string according to the keys touched by the operator.
This changes upper/lower-case of alphabet. The [ABC../abc..] key is highlighted when
the lower-case-letter-setting is valid.
This enters characters in the input area or screen.
[?]: This displays the parameter/guidance window.
[SHIFT] key + [LIST]: Switches the prototype screen and mass production screen.
: This changes active windows.
This resets the NC. (*1)
Not available.
Not available.
This displays the contents in the previous/next page.
When the numerical keypad display keyboard is displayed automatically at the time of
Yes/No confirmation, [Y]/[N] keys are displayed instead of page up/down keys.
If data is set in the display items on the screen, the cursor is moved to vertically/horizon-
tally.
This enters a blank.
[INSERT]:The mode changes to data insertion mode, and characters are input at the
current cursor position when data setting key is pressed.
When [DELETE], [C.B CAN], [INPUT], cursor key, or tab key, etc. is pressed, or when
the screen is changed to another, the mode returns to overwriting mode.
[DELETE]: This deletes a letter before the cursor position.
[C.B]: This cancels the settings in the input area.
[CAN]: This cancels.
This enters ";".
This confirms the data entered in the input area or screen.
This validates the setting on the lower line of the data setting key.
Once [SHIFT] key is selected, it will be valid until another key is pressed or the software
keyboard is closed. Menus are displayed in highlight while [SHIFT] key is valid.
39
(6) (7)
(12)
(17) (15) (14) (10)
Details
(4)
(11)
(3)
(13)
(2)
IB-1501453-C