Mitsubishi Electric C80 Series Instruction Manual page 292

C80 Series Instruction Manual
8 Other Setups
Note
(1) If the number of spindles is 5 or less, the scroll bar is not displayed.
Menus
Menus
This closes the pop-up window and quits this function.
Close
Operation method (Executing T31 with a manual numerical value command)
(1) Press the main menu [MST].
Using the [↑] or [↓] key, move the cursor to the setting
position.
(2) The manual numerical value command can also be
issued by using the address keys instead of the op-
eration above.
(Example) [T]
(3) Input a numeric value.
31 [INPUT]
Note
(1) The cursor moves to the first line when the part system is changed while displaying the manual numeric command win-
dow.
Operation method (Canceling the manual numerical value command)
The manual numerical value command mode is canceled by carrying out one of the following operations before pressing
the [INPUT] key.
Press the menu [Close].
Press the key.
Change the screen.
Details
The S, M, T, B display opens as a pop-up window.
S 100
M 50
T 4
B 1000
The cursor moves.
The S, M, T, B display opens as a pop-up window.
The cursor appears at T.
S 100
M 50
T 4
B 1000
The input value is set.
267 IB-1501453-C