C80 Series Instruction Manual
9 Machining a Workpiece
9.2.7 Modal Display
Monitr
Modal
The state of each modal during automatic operation is displayed.
The displayed details differ for the M system and L system.
<M system>
(1)
(2)
(3)
Even if operating area is switched in the 2-part system simultaneous display, the position of the pop-up window will not
change. It is always displayed at the bottom of the screen.
Display items
Display items
(1)
G modal list
IB-1501453-C
The list below shows the G command modal status of the currently executed groups 1 to
20.
Each item displays the following information.
G00: Displays the G command modal status of the currently executed group 1.
G17: Displays the G command modal status of the currently executed group 2.
:
Displays the G command modal status of each group in sequence.
G50.1: Displays the G command modal status of the currently executed group 19.
300
Details
(4)