Mitsubishi Electric C80 Series Instruction Manual page 336

Hide thumbs Also See for C80 Series:

Table of Contents

C80 Series Instruction Manual

9 Machining a Workpiece

(1) Status abbreviations are displayed only in "Tip Mach posn" counter area. They are not displayed in other counter area.

(2) The data for 5 axes can be displayed in each counter. In case the number of valid axis is 6 or more, and you want to

display the 6th and subsequent axes, press the menu [Next axis] to switch display.

Select the counter type to display on "the counter display 1 to 3".

It is valid after the power is turned ON again.

The counters shown below can be selected.

Machine position counter

Workpiece coordinate position counter

Inclined surface (*1)

Tool axis movement

This changes the displayed axes each counter.

This closes the pop-up window and quits this function.

(*1) It cannot be selected when the inclined surface machining command is not valid.

IB-1501453-C