Main Screen - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.3.1 Main Screen

The type 1 and type 2 restart search can be executed from the main screen.
(1)
(2)
(4)
(5)
(6)
Display items
Display items
(1)
Device name, directory
display
(2)
Research position
(3)
Restart type
(4)
Position when restart
search is completed
(5)
Remaining distance when
restart search is completed
(6)
Input section
(*1) If the sequence number exceeds six digits, only the low-order six digits are displayed.
(3)
This displays the device and directory where the searched machining program is lo-
cated.
This displays the researched main program position (program No., sequence
No.(*1), repeat count, block No.).
This displays the restart search type.
This displays the position on the local coordinate system when the restart search is
completed.
This displays the remaining distance when the restart search is completed.
This displays details of the key input.
317
Details
IB-1501453-C