Erasing A File - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program

4.5 Erasing a File

Edit
I/O
This section explains the method used to erase files on the I/O screen of the edit (Edit) screen.
Refer to "4.2 Selecting a Device, Directory and File" for details of the device, directory, and file specification method.
Operation method (Erasing a file in file setting column A)
(1) Use the [←] or [|←] key to select file setting column A on the I/O screen of the edit screen.
(2) Designate the device, directory and file name to be erased.
(3) Press the menu [Erase].
(4) Press the [Y] or [INPUT] key.
Note
(1) If the file to be erased is running, an error will occur, and the file will not be erased.
(2) When a wildcard "*" is designated for the file to be erased, the erasing is executed excluding the programs which are
subject to the edit lock according to the status of Edit lock B and C.
Operation method (Erasing a file in file setting column B)
Use the [→] or [→|] key to select file setting column B, and designate the device, directory, and file name for file setting
column B. Following this, the operation method is same as for "Erasing a file in file setting column A".
109 IB-1501453-C