Mitsubishi Electric C80 Series Instruction Manual page 296

Hide thumbs Also See for C80 Series:

Table of Contents

C80 Series Instruction Manual

8 Other Setups

This executes an absolute input.

This executes an incremental input.

Press this menu to automatically input the lead machine position or spindle angle in the stored rethread

position window and store data.

This changes the re-thread cutting status to "In thread recutting", enabling thread recutting using the

stored data. If this menu is not pressed, thread recutting is not carried out. If this menu is pressed while

thread recutting is disabled, the message "Thread recut position is unspecified" is displayed.

This changes the thread recutting status from "In thread recutting" to "Re-thread position specified", dis-

abling thread recutting.

This erases all data of the stored positions.

This closes the pop-up window.

IB-1501453-C