Load Meter Display - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.2.10 Load Meter Display

Monitr
LdMeter
The spindle load and Z axis load, etc., are displayed.
Display items
Display items
(1) NC axis load meter
(2) Spindle load meter
(3) NC axis name
(4) Spindle name
(5) Load current (%)
(6) Load(%)
Menus
Menus
This closes the pop-up window and quits this function.
Close
IB-1501453-C
(1) (2)
(3)
(5)
Up to eight NC axes loads (%) are displayed.
The display color of graph is switched in accordance with the NC axis load. The thresh-
old values of cautions (yellow) and warning (red) are determined according to the pa-
rameters (#2643 to #2645).
Up to eight spindles loads (%) are displayed.
The graph display color varies depending on the spindle load value. The threshold val-
ues of cautions (yellow) and warning (red) are determined according to the parameters
(#3192 to #3194).
This displays the axis name set with the parameter "#1022 axname2".
This displays "S" + "Spindle No.".
This displays the NC axis load current.
This displays the spindle motor load.
308
(4)
(6)
Details
Details