Mitsubishi Electric C80 Series Instruction Manual page 327

C80 Series Instruction Manual
9 Machining a Workpiece
Display items
(3) MSTB display area
(4) F modal display area This area displays the F modal value and manual feedrate.
(*1) Displays the current control mode. When multiple control modes are enabled simultaneously, one of them is displayed
in the order in which the priority is higher. (The priority is higher beginning at the top.)
(*2) G121 command: Machining Condition Selection I Cancel
Changes to the machining condition selection command that is selected in [Setup] - [MacCond] screen.
IB-1501453-C
This area displays the program command modal value for each of the currently executed
commands.
Each item displays the following information.
S command
M command
T command
2nd miscellaneous function (B) command
The number of S displays varies depending on the value of the parameter "#1039 spinno"
(Number of spindles).
The number of M displays varies depending on the value of the parameter "#12005 Mfig"
(M count).
The number of T or B displays is set to "1" regardless of the value of the parameters
"#12009 Tfig" (T count) and "#12011 Bfig" (B count). However, for the B display, the value
is displayed or hidden depending on the value of the parameter (#1170 M2name 2nd mis-
cellaneous code).
For the T display, only the tool number is displayed regardless of the value of the param-
eter "#11038 T disp type".
FA: Displays the program command F modal value of the currently executed command.
FM: Displays the manual feedrate.
302
Details