Table of Contents
Advertisement
MITSUBISHI CNC
4 Edit Screens
4.2.9 Rewriting Data
Operation method
Move the cursor to the position of the data to be
(1)
rewritten.
The cursor can be moved to one place to the right of
EOB (;).
(2)
Set the data.
When one line of setting is completed, press the
(3)
[INPUT] key.
(Note 1) Up to 255 characters can be input in one block in regular editing and 127 characters in mass-editing.
(Note 2) When the cursor is on or one place to the right of EOB ( ; ), input data is inserted even if not in input mode
(refer to "4.2.10 Inserting Data".)
(Note 3) When changing to another function such as the program check, or to another screen such as the operation
screen when "Editing" displays, the operation message "Save current file? (Y/N)" displays. If [N] key is
pressed changing to the other screen once, and the Edit screen is selected again, the program before editing
operation will be displayed. (Edited contents will be invalid.)
(Note 4) "Saving" is displayed in flickering during saving.
4.2.10 Inserting Data
Operation method
Move the cursor to the position where data is to be
(1)
inserted.
(2)
Press the [INSERT] key.
(3)
Set the data.
When the setting is completed, press the [INPUT]
(4)
key.
(Note 1) Up to 256 characters can be set in one line.
(Note 2) The insertion mode will be finished if a key such as [DELETE], [C.B], [CAN], [INPUT], [↑], [↓], [←], [→], [ |←],
[ → | ],
or
(Note 3) During regular editing, EOB ( ; ) is added to the line without EOB ( ; ) before moving to the next line; EOB ( ; )
is not added to the the line with EOB ( ; ). (No cursor movement.)
(Note 4) During mass-editing, linefeed is inserted every time EOB ( ; ) is input. (Cursor moves to the head of next line.)
I - 220
pressed.
The message "Editing" appears when setting is started.The
data is set from the position of the cursor. Data at the area is
overwritten.The cursor moves one space (character) at a time
to the right as the data is set.
EOB ( ; ) is added to the set data and the data is fixed.When
newly creating data, the cursor moves to the head of the next
line.
When changing existing data, etc., the cursor does not move.
The insertion mode is entered."INS" and "Editing" appear to
the right of the file name.
The data is inserted before the cursor position. Data after the
cursor moves to the night.
The set data is fixed.
The cursor does not move, but if there is no EOB ( ; ) at the end
of the line, it will be added. Then, the cursor moves to the next
line.
The mode returns to the overwrite mode, and the message
"Editing" disappears.
Advertisement
Table of Contents
