Adding Sequence No. (N No.) Automatically - Mitsubishi Electric C80 Series Instruction Manual
Hide thumbs
Also See for C80 Series:
- Manual (749 pages) ,
- Maintenance manual (162 pages) ,
- Connection and set up manual (304 pages)
Table of Contents
Advertisement
C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
3.7.2 Adding Sequence No. (N No.) Automatically
When the sequence No. (N No.) is input once, the sequence No. to which a constant value is added can be automatically
added to each block of the machining program.
The added sequence No. data is to N2 to N99999999.
Operation method
(1) Press the menu [N auto add].
(2) Input the incremental value.
(Example) 10 [INPUT]
<When creating a new program>
(3) Press the menu [Open (New)], then press the menu [Memory].
(4) Input a file name not used, then press the [INPUT] key.
(Example) 101
(5) Input a program with N No.
(Example) N100G28XYZ
<When editing an existing program>
(3) Press the menu [Open], then press the menu [Memory].
(4) Select a file, then press the [INPUT] key.
(5) Move the cursor to the position where data is to be inserted. Press the [INSERT] key.
(6) Input " ; " (EOB).
(7) Input the second block data and " ; " (EOB).
(Example) G92X0.Y0.Z0.;
(8) Press the [INPUT] key.
Note
(1) When the menu [N auto add] is pressed again while the menu is highlighting, N No. additional value display column is
cleared, and N No. automatic addition is canceled.
(2) The setting range is 1 to 1000. When "01" is input, "1" is set. When "0" is input, this function is canceled. When an illegal
value or 9 characters or more is input, an error will occur.
(3) When "0" is input, this function is canceled.
(4) When an illegal value or 9 characters or more is input and [INPUT] is pressed, the "Setting error" appears.
(5) The incremental value can be set even when the machining program has been not opened. Even if the machining pro-
gram is opened again, the incremental value is not invalid.
(6) The incremental value is not cleared with the screen transition.
(7) Even if the same N No. exists by automatic addition, an error will not occur.
(8) The system separately has N No. in a right area and left area of the edit screen.
(9) When the previous block is leading zero like "N010", N No. automatic addition can be executed. However, "0" is not
added, and "N10" is displayed.
75
IB-1501453-C
Advertisement
Table of Contents
