Erasing A File - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables

3.5 Erasing a File

Edit
Edit
Operation method
(1) Press the menu [Erase file] on the edit screen.
(2) Select the device.
(Example) Menu [Memory]
(3) (In case of the device other than NC memory.)
Press the [↑], [↓],
sor to the directory with the machining program or the
directory to be newly created.
If the list contents differ from the actual device or di-
rectory, press the menu [List Update].
(4) (For the devices other than NC memory)
Press the [INPUT] key.
(5)
Press [↑], [↓],
to the machining program to be edited.
The name of the machining program to be erased
can be input in the input area.
(6) Press the [INPUT] key.
When a name of machining program is inputted in
the input area, the confirmation message appears.
(7) Press the [Y] or [INPUT] key.
Press the [N] key to cancel.
Note
(1) The file is not erased in the following cases.
The file that is to be erased is currently being used in automatic operation.
The file that is to be erased is subject to edit lock B or C.
Data protection is valid.
The file to be erased is in the "program restarting" state.
, or key to move the cur-
, or key to move the cursor
The selected device name and directory (memory: /pro-
gram) appear in the device name and directory display
columns.
For the devices other than NC memory, root directory is
selected.
The device on the side being edited is displayed first.
If a file is not opened, NC memory will be opened.
Moves into the directory.
61 IB-1501453-C