Mitsubishi Electric C80 Series Instruction Manual page 66

C80 Series Instruction Manual
2 Screen Operations
Changing the display position
Touching the or
sition to the left or right.
(1) Touch the [S/W Key] button.
(2)
Touch the key located at the upper right corner
of the software keyboard.
(3)
Touch the key located at the upper right corner
of the software keyboard.
Note
(1) When the key is pressed, the software keyboard moves to the left.
(2) If the key is pressed when the [S/W Key] button appears on the left of the screen or if the
when the [S/W Key] button appears on the right of the screen, the software keyboard does not move.
Entering data when the input area is enabled
If displaying the software keyboard while input area is being displayed on a screen, such as in the case where the operation
search window or setup screen is being displayed, the software keyboard input area will be valid. At this time, the key se-
lected on the software keyboard is temporarily displayed in the software keyboard input area, and then is input and set in
the screen by selecting the [INPUT] key.
(Example) Set the value in T tool compensation amount
(1) Display T compensation tab on the setup screen and
touch the [S/W Key] button.
(2) Touch the [↑], [↓], [|←], [→|] keys to move the cursor
to an arbitrary position.
(3) Touch the data setting key and enter the value.
Example: 15
(4) Touch the [INPUT] key.
Note
(1) It is possible to make an operation input in the entry field of the software keyboard. For details on settings and opera-
tions, refer to "2.3.2 Inputting Operations".
(2) If 20 or more characters are entered in the entry field of the software keyboard, character strings displayed in the input
area are scrolled in sequence.
(3) If you touch the [←] or [→] key while the input area of the software keyboard is enabled, the cursor will move in the
relevant direction in the entry field.
key on the top of the software keyboard allows you to move the software keyboard display po-
The software keyboard is displayed on the left side of the
screen.
The [S/W Key] button is highlighted.
The software keyboard moves to the right, and it ap-
pears on the center of the screen.
The software keyboard moves to the right, and appears
on the right side of the screen.
The software keyboard is displayed on the left side of the
screen.
Software keyboard input area will be invalid.
The cursor for tool compensation amount is moved.
"15" is displayed in the software keyboard input area.
"15" is input at the tool compensation amount cursor po-
sition.
41
key is pressed
IB-1501453-C