Operation Mode/Mdi Status; Operation Status - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
2 Screen Operations

2.2.3 Operation mode/MDI status

The displayed part system operation mode and MDI status are displayed.
When the operation mode or MDI status is changed, the display changes as follows.
Display Details
Memory Memory operation
TAPE Tape mode
MDI NON No MDI setting
MDI SET MDI setting completed
MDI RUN MDI running
Manual feed Jog
Manual handle Manual handle
Step Step
MANUAL Manual arbitrary feed
Reference po- Reference position re-
sition return turn
INIT-SET Automatic dog-less ref-
erence position return
Rapid traverse Rapid traverse
JOG+HND Jog + Handle
RAP+HND Rapid traverse + Han-
dle
NO MODE No operation mode

2.2.4 Operation status

The operation status displays the currently selected NC operation status for each part system. (The maximum number of
the part system which can be displayed.)
The inverted number expressing the part system No. is not displayed for 1-part system.
Symbol
EMG In emergency stop
RST Resetting NC
BST In block stop
HLD Operation halted
SYN Synchronizing
CRS Cross conversion waiting
AUT In automatic operation
RDY Operation completed state
Automatic operation is based on programs stored in the memory.
This mode is displayed when FTP high-speed program server mode operation
(additional specification) is performed.
Automatic operation is performed with the program set in the MDI screen.
The jog feed mode enables the axis to be moved by hand consecutively at the
feed rate set by using the MANUAL FEED RATE switch.
The handle feed mode enables the axis to be moved by turning the manual
handle. The travel distance per graduation of the handle depends on how the
"HANDLE/INCREMENTAL MAGNIFICATION" switch is set.
The step feed mode enables the axis to be moved by hand at feed rate when
the "FEED AXIS SELECT" switch is ON. The travel distance per graduation of
the handle depends on how the "HANDLE/INCREMENTAL MAGNIFICATION"
switch is set.
This mode enables to move manually with arbitrary amount or arbitrary posi-
tioning position.
This mode enables a controlled axis to be returned manually to the defined po-
sition unique to the machine (reference position).
This mode enables this mode to manually push against the machine end stop-
per and carry out zero point return.
The rapid traverse feed mode enables the machine to be moved consecutively
at rapid traverse rate manually.
This is the jog and handle synchronous feed mode.
The rapid traverse and handle can be used simultaneously.
The operation mode is not selected.
Details
19
Details
Character color
White Red
White Dark gray
White Dark gray
White Dark gray
White Dark gray
White Dark gray
White Dark gray
Black Green
Background color
IB-1501453-C