Mitsubishi Electric C80 Series Instruction Manual page 193

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
Setting item
Custom 1 to 12
Group No.
Status
Method
H No.
L compen
D No.
R compen
Aux.
Offset num
Life
Used
Operating time
Life time
T usage count
T life count
Status A
Status B
H No.
D No.
Length
L wear
Radius
R wear
Tool L offset num
Wear offset #
Tool length data
Wear data
Nose R
R-wear
Point
(*1) The symbols "/" (Slash), "\" (Backslash), """ (Double quotes) and "=" (Equals) cannot be used for names or IDs. Also,
"=" (Equals) cannot be used as the first character.
(*2) When the parameter "#8968 Tool shape radius" is set to "0", input the value of diameter. When the parameter is set
to "1", input the value of radius.
(*3) In case of tool life management I/ll for M system and tool life management ll for L system, it cannot be set in the state
that group No. is not set.
(*4) In case of tool life management I/ll for M system, it cannot be set in the state that group No. is not set.
(*5) It cannot be set with tool life management ll for L system. Only reference is available.
IB-1501453-C
Details
Sets the custom information.
Sets the group No.
When the group No. is cleared, the life management data
is also cleared.
Sets the status. (*3)
Sets the method. (*4) (*5)
Sets the H No. (*4)
Sets the L offset. (*4)
Sets the D No. (*4)
Sets the R offset. (*4)
Sets the auxiliary data. (*4)
Sets the compensation No.
Sets the life. (*4) (*5)
Sets the used. (*3)
Sets the maximum life time.
Sets the usage life time.
Sets the maximum life count.
Sets the usage life count.
Sets the status A.
Sets the status B.
Sets the H No.
Sets the D No.
Sets the tool length compensation amount.
Sets the compensation amount of tool length wear.
Sets the tool radius compensation amount.
Sets the compensation amount of tool length wear.
Set the tool L offset No.
Set the wear offset No.
Sets the tool length data compensation of 1st axis, 2nd ax-
is, and additional axes.
Sets the nose wear compensation of 1st axis, 2nd axis,
and additional axes.
Sets the nose R.
Sets the R-wear.
Sets the point.
Display format and setting range
vary depending on the MTB speci-
fications.
0 to 99999999
Group No. is cleared when it is set
to "0".
Setting range varies depending on
the tool life management method.
For details, refer to "5.6 Tool Life
Management".
Setting range varies depending on
the tool compensation type. For
details, refer to "5.4 Setting Tool
Compensation Amount (Tool Off-
set Screen)".
168
Setting range