Displaying The Group List (M System: Tool Life Management I, Ii / L System: Tool Life Management Ii) - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
5.6.1 Displaying the Group List (M system: Tool life management I, II / L system: Tool life management
II)
Tool life management data groups can be registered and erased. Press [Group list] when displaying the group unit.
When changing from a group unit display to the group list display, the cursor displays at the group No. at the group unit
display.
<M system>
Display items
Display items
(1) Regist group list
The group Nos. registered as the tool life management data are listed in ascending or-
der.
Group Nos. can be set from 1 to 99999999, and maximum 1000 groups can be set.
Maximum 60 groups can be displayed at a time. Use the
change the display if the No. of registered groups exceeds 60.
An asterisk will be added to the No. of the group in which all tools have reached their
lives.
<Note>
The maximum number of the registered groups depends on the specifications.
In tool life management II, when all the tools' statuses (ST) of the target group be-
come 2 to 4, "*" is displayed.
183
(1)
Details
and keys to
IB-1501453-C