Chapter 27 Control Of Various Data (Data Control); Data Storage Location; Data Type And Storage Location - Mitsubishi Electric GOT SIMPLE Series Operation Manual

27
CONTROL OF VARIOUS DATA (DATA
CONTROL)
A system application, project data (screen data), or alarm data which is written in the GOT or SD card can be displayed, and
the data can be transferred between the GOT and SD card.
The format of the SD card is also possible.
27.1

Data Storage Location

Data type and storage location

System
The data storage location and transferring (write/read) route for each data type are shown below.
Also, the data storage locations are shown below.
C drive
(Built-in flash memory)
System application
Boot OS
Install/
Project data Download
A drive
(Built-in SD card)
SD card
(when installed in GOT)
The data of the build in flash memory (Project data, etc.) can be saved.
Item Data type
Boot OS
Boot OS
*1
Basic system application
System application
Communication driver
Advanced system application
*1
Project data
Project data
(Including recipe setting, alarm conditions, time action, and GOT setup.)
*1 The SD card can be used from Utility.
Page 279 OS information
*2 When using the project data stored in the Standard SD Card (A drive) with the GOT, hold the SD card installed to the GOT.
System application
Boot OS
Project data
System application
Boot OS
Upload
Project data
Inserting/
Removing
Write
Read
PC
Project data
GT Designer3
Copy files on Write
Windows
Project data
SD card
(when installed in PC)
Install, Write :
Upload, Read :
Storage location
Built in flash memory (C drive)
Standard SD card (A drive)
Built in flash memory (C drive)
Standard SD card (A drive)
Built in flash memory (C drive)
27 CONTROL OF VARIOUS DATA (DATA CONTROL)
27.1 Data Storage Location
Boot OS
Project data
*2
*2
275
27