Menu Customization Function - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
2 Screen Operations

2.7 Menu Customization Function

You can freely relocate the main menus of the monitor (Monitr), setup (Setup) and edit (Edit) screens.
This function enables to place the often-used keys in the first page.
It can be used when a parameter "#11032 Menu sel para lkof" (Validate menu selection parameter setting) is set to "2".
MTB password is required when it is set to "1".
The main menu of monitor screen, setup screen and edit screen correspond to the following parameters:
<Menu selection parameter>
Main menu for monitor screen: "#10501 Monitr main menu 1" to "#10530 Monitr main menu 30"
Main menu for setup screen: "#10551 Setup main menu 1" to "#10580 Setup main menu 30"
Main menu for edit screen: "#10601 Edit main menu 1" to "#10630 Edit main menu 30"
Refer to "Alarm/Parameter Manual" for details.
Setting example
Main menu for monitor screen is changed as follows.
The figure below is the default layout.
<Default layout>
#10501 #10502 #10503 #10504 #10505 #10506 #10507 #10508 #10509 #10510
#10511 #10512 #10513 #10514 #10515 #10516 #10517 #10518 #10519 #10520
#10521 #10522 #10523 #10524 #10525 #10526 #10527 #10528 #10529 #10530
(1) Set the parameters "#10501 Monitr main menu 1" to
"#10530 Monitr main menu 30" as shown in the right.
(2) Turn the power ON again
IB-1501453-C
Menu on page 1
Menu on page 2
Menu on page 3
<Parameter>
#10501
#10503
#10506
#10510
#10513
#10519
#10525
#10527
Set "0" to the parameters other than the listed
above.
The new layout of the monitor screen's main menu
is displayed.
46
<After>
3 (Edit)
1 (Search)
11 (Modal)
1 (Not display)
7 (Coord)
-1 (Not display)
3 (Edit)
16 (P corr)