Selecting A Device, Directory And File - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
11 Performing a Backup Operation

11.1 Selecting a Device, Directory and File

Mainte
I/O
File selection sequence
Designate the device where the target file is located.
Designate the directory with a full path.
Designate the file name.
Menus
Sub-menus of [Device select]
Menus
This selects the NC memory (program, parameter, PLC program, NC data).
Memory
This selects the back-side SD card of the GOT.
Memory
card
This selects USB memory.
USB
Memory
This select the expanded area of NC memory.
Memory2
This menu is grayed out and non-selectable, when the specification of program memory capacity
1000kB[2560m] or 2000kB[5120m] is invalid.
Sub-menus of [Dir] (other than memory) and [File name]
Menus
The cursor appears in the list display. The list contents can be selected with the [INPUT] key.
From
When a directory is selected, the contents of the selected directory are displayed in the list. Continued
list
selection is possible.
When a file name is selected, the file name is temporarily displayed in the input area. When the [INPUT]
key is pressed again, it is fixed.
[In normal mode]
Top
The contents of the first page in the list are displayed.
jump
[When importing data from the list]
The contents of the first page in the list are displayed, and the cursor moves to the top row.
[In normal mode]
Bottom
The contents of the last page in the list are displayed.
jump
[When importing data from the list]
The contents of the last page in the list are displayed, and the cursor moves to the bottom row.
IB-1501453-C
Select from the sub menu.
Input the full path or select from the list.
Input the file name or select from the list.
Details
Details
396