Barrier Data - Mitsubishi Electric MELDAS C6 Parameter Manual

# Item
8208 G76/87 (–)
(For M system only)
8209 G60 SHIFT
(For M system only)
8210 OT INSIDE

2.5 Barrier Data

# Item
8300 P0
(For L system only)
8301 P1
8302 P2
8303 P3
8304 P4
8305 P5
8306 P6
(For L system only)
2. Machining Parameters
2.5 Barrier Data
Contents
Specify the shift direction at G76 and G87.
0: Shift to (+) direction
1: Shift to (–) direction
Set the last positioning direction and distance for a
G60 (uni-directional positioning) command.
The stored stoke limit function set in #8204 and
#8205 prevents the machine from moving to the
inside or outside of the specified range.
0: Inhibits outside area.
(select stored stroke limit II.)
1: Inhibits inside area.
(select stored stroke limit II B.)
Contents
Set the reference X-coordinates of the chuck and
the tail stock barrier.
Set the center coordinate (Radius value) of
workpiece by the basic machine coordinate system.
Set the area of the chuck and tail stock barrier.
(Radius value)
Set the coordinate value from the center of workpiece
for X-axis.
Set the coordinate value by basic machine
coordinate system for Z-axis.
8
Get other manuals https://www.bkmanuals.com
Setting range (unit)
0/1
–99999.999 to
+99999.999 (mm)
0/1
Setting range (unit)
–99999.999 to
+99999.999 (mm)
–99999.999 to
+99999.999 (mm)