Selecting A Device, Directory And File - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program

4.2 Selecting a Device, Directory and File

Edit
I/O
This section explains the file device, directory, and file name specification methods for the file transfer and erase commands
etc. performed on the I/O screen of the edit (Edit) screen.
File operation procedure
Outline of device, directory, and file name designating methods
Device Designation target file
NC memory Machining program
User macro program
Fixed cycle program
Device other All files
than the NC
memory
(1) The device can be selected using the sub-menu or shortcut keys.
(The devices that can be used will differ depending on the specifications.)
(2) One of the following methods can be used to designate the directory (for devices other than the NC memory) and file
name.
Designate the directory path or file name in the input area and press the [INPUT] key.
Move the cursor in the list display section to the target directory or file name and press the [INPUT] key.
A wildcard (*) can be used for the file name.
Note
(1) When the number of characters of directory path (full path) exceeds 128, changing directories cannot be performed.
Notes when selecting a file
(1) During directory and file name setting, the designated directory, path or file name will be set, even if it does not actually
exist. This will not cause an error. Note that the previously set directory is overwritten.
(2) When selecting a fixed cycle program, it is necessary to set the parameter "#1166 fixpro". Furthermore, select "Memory"
for the device, and "Program" for the directory.
IB-1501453-C
Select device where the file a
subject to the operation exists.
Specify the directory
Specify the file.
Device
Select from the sub
menu.
Designate using the
shortcut key.
Select from the sub
menu.
Designate using the
shortcut key.
Select using the shortcut keys or sub -menu.
Select a path from the list, or input using the
keys.
Select a file from the list, or input using the
keys.
Designation method
Directory
-
(Default)
Key input in the input
area, then press the
[INPUT] key.
Select from the list.
102
File name
Key input in the input area,
then press the [INPUT]
key.
Select from the list.
Key input in the input area,
then press the [INPUT]
key.
Select from the list.