Mitsubishi Electric C80 Series Instruction Manual page 319

C80 Series Instruction Manual
9 Machining a Workpiece
<Monitor screen (2-part system simultaneous display)>
The following counter type is displayed in the target operation area on the left.
Also, the same counter type is displayed in the target operation area on the right.
[Counterexpand]
#8901
Counter type 1
[Dual counter]
#8901
Counter type 1
#8902
Counter type 2
[Quad counter]
#8901
Counter type 1
#8902
Counter type 2
IB-1501453-C 294
#8903
Counter type 3
#8904
Counter type 4