Changing A File Name (Rename) - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
4 Inputting and Outputting a Machining Program

4.6 Changing a File Name (Rename)

Edit
I/O
This section explains the method used to change the file name on the I/O screen of the edit (Edit) screen.
Refer to "4.2 Selecting a Device, Directory and File" for details of the device, directory, and file specification method.
Changing a file name
(1) Use the [←] or [|←] key to select file setting column A on the I/O screen of the edit screen.
(2) Designate the original device, directory and file name.
(3) Use the [→] or [→|] key to select file setting column B.
(4) Designate the new device, directory and file name.
(5) Press the menu [Rename A→B].
(6) Press the [Y] or [INPUT] key.
Note
(1) Make sure the original and new devices are the same.
(2) If the file to be renamed is running or program restarting, an error will occur, and the name will not be changed.
(3) If a file that does not exist is designated for the original file, or if an existing file name is designated for the new file se-
lection, an error occurs, and the name is not changed.
IB-1501453-C 110