Mitsubishi Electric C80 Series Instruction Manual page 77

C80 Series Instruction Manual
3 Inputting a Machining Program and Defining Variables
Playback display type
(8)
Display items
Display items
(1) Path display
(2) N No. incremental value
display
Current edit display "Ed-
iting"
Insert mode display
"INS"
Program name display This displays the file name of the program currently being edited.
(3)
Top line of the displayed
(4)
program
(5) Line number
Program display
(6) Input section
(7) G code guidance dis-
play
(8) Playback display
IB-1501453-C
The path of the currently opened program file is displayed.
(Example) Memory:/program
When the path is too long, the characters exceeding the 37 characters (1-byte code)
cannot be displayed.
<N No. incremental value display>
This displays an automatic additional value of sequence No.
<Current edit display "Editing">
This displays when performing edit operations after displaying the program.
<Insert mode display "INS">
The overwrite mode and insert mode are switched by pressing the [INSERT] key. This
is displayed when the insert mode is selected.
This displays "MDI" when the MDI program name is being edited.
This displays the top line of the displayed program.
<Line number>
This displays the last 3 digits of the program line number.
When over two or more lines are displayed on the screen because one line is long, the
line No. does not attach to the beginning of the next line.
<Program display>
This displays the contents of the program (machining program, MDI program) current-
ly being edited.
The line that the cursor is on is highlighted.
This inputs the program line number and search character string.
This displays G code guidance. For details, refer to "2.4.3 G Code Guidance".
This displays playback status. For details, refer to "3.7.4 Playback Editing".
52
Details