Tool Center Coordinate Display - Mitsubishi Electric C80 Series Instruction Manual

C80 Series Instruction Manual
9 Machining a Workpiece

9.2.12 Tool Center Coordinate Display

Monitr
TipDisp
The tool center coordinates, handle interrupt amount (tool axis movement) and tool center point speed are displayed by the
following functions: the tool center point control function, the tool length compensation along tool axis function and the tool
handle feed & interrupt function (handle feed along the tool axis, tool handle interrupt, tool diameter direction handle feed,
nose center rotation handlefeed)
This function is an additional specification. Any of the following specifications is required.
Tool center point control
Tool length compensation along the tool axis
Tool handle feed & interruption
Inclined surface machining command
3-dimensional tool radius compensation (tool's vertical-direction compensation)
3-dimensional manual feed
(1)
(2)
(3)
(4)
Display items
Display items
(1) Tip Mach posn
(2) Tip wk G54
(3) Mech axis angle
(4) Tip speed
(5) Counter display1
(6) Counter display2
(7) Counter display3
IB-1501453-C
This displays the position of the tool center from the machine coordinate system ref-
erence position in the machine coordinate system.
This displays the position of the tool center from the workpiece coordinate reference
position in the selected workpiece coordinate system.
This displays the rotation angle when using the mechanical axis.
1st rotary axis angle: R2628 (L)/R2629 (H)
2nd rotary axis angle: R2630 (L)/R2631 (H)
This displays the movement speed of tool center. By the parameter "#1125 real_f", ac-
tual feedrate and command speed can be switched.
The counter type can be selected from the menu.
The following counters are displayed by default.
Counter display 1: Machine position counter
Counter display 2: Workpiece position counter
Counter display 3: Tool axis movement counter
310
Details
(5)
(6)
(7)