Mitsubishi Electric C80 Series Instruction Manual page 278

C80 Series Instruction Manual
7 Setting Machine Movable Area
Display items
(1) Guide drawing
(continued)
(2) Barrier data
(3) Error message
(4) Input section
Tailstock type 1 guide drawing
This displays the barrier data. The display items differ depending on the length/coordi-
nates value input and left/right-side barrier. The setting range is from -99999.999 to
99999.999 (mm). However, minus data cannot be input for length data.
<Length input mode>
Set the chuck or tailstock position with the length (length between P points).
When the value is set, the coordinates data is also updated.
Chuck barrier
<Coordinates input mode>
Set the chuck or tailstock position with the distance from the workpiece center coordi-
nates (P0). When the value is set, the length data is also updated.
Chuck barrier
This is displayed when barrier data setting is illegal.
This displays the input data.
253
Details
Tailstock type 2 guide drawing
Tailstock barrier
Tailstock barrier
IB-1501453-C