C80 Series Instruction Manual
5 Setting a Tool and a Workpiece
Operation method (Registering a group)
(1)
Press the menu [Group regist].
(2)
Set the No. of the group to be registered.
25/1/3000 [INPUT]
Note
(1) If the method and life data are omitted, a new group is created with method = 0 (usage time), and life data = 0.
(2) An error occurs if the group No. duplicates a pre-existing group No.
(3) The group is not registered if one of the operations below is performed after registering a new group No.
If the application is exited without registering even 1 item of tool life data.
The screen is changed to that of other than the group unit display.
The part system is changed.
Operation method (Changing the active area for multiple group displays)
(1)
Press the menu [Group change].
The cursor indicating the active status moves to the next
group.
201
IB-1501453-C